Hardware and Fasteners

Hardware & Fasteners

Coastal Decks & Docks specializes in all types of fasteners for all of your marine construction needs in both galvanized as well as stainless steel.



We Carry:

• Carriage Bolts from ½” to 5/8” in stock lengths from 10” to 16” to use in connecting lumber to lumber available in Stainless or Galvanized.
• Wedge Anchors ½” diameter  specialty anchors for anchoring to concrete i.e. seawall caps or seawalls available in stainless or galvanized.
• Lag Bolts ½” anchors for lumber to lumber in 4, 5, and 6” available in Stainless or Galvanized.
• Threaded Rod (all-thread) ½” or 5/8” in 1 ft. increments up to 12’ available in Stainless or Galvanized.
• Tie Back Washers 6”x6” to secure tie back for use with threaded rod available in Stainless or Galvanized.
• Tie Backs pre welded 5/8” rebar on a 3”x3” washer for use in securing treaded rod in the concrete “dead man”
• Ringshank nails  1¼”, 16-d, 20-d and 30-d common stainless for use in framing or installation or pile wrap or piling caps. By the lb or the 25lb box.
• HDG Common nails in sizes 16-d, 20-d, 30-d, and 60-d by the lb. or the 50lb box.
• Simpson “Z” Max Joist Hangers Simpsons specialized joist hangers. ZMAX is a heavier / thicker coating than the standard hot-dip galvanized coating (galvanized per ASTM A653 with a class G135 coating). These hangers can accommodate a 2×8 or a 2×10 stringer.